HITEALLOY

Basic characteristics:

The excellent cold rolling and cold forming properties of TB5 alloy enable it to form moderately complex sheet metal parts at room temperature and perform superplastic forming above 700 ℃. In addition, this alloy can also be used for the production of cold heading rivets and bolts.

TB5 (GB/T 3620.1-2016) chemical composition:

The chemical composition includes chemical components with unspecified values in the table. Analysis should only be conducted if it is assumed to exist or in routine analysis, and there are indications that its composition will exceed the specified value.

Execution standards:

GB/T 3620.2-1994 "Chemical composition and permissible deviations of titanium and titanium alloy processed products".Q/6S 1058-1995 "Solid solution treated Ti-15V-3Cr-3Sn-3Al titanium alloy sheet".

Q/6S 1206-1995 "Ti-15V-3Cr-3Sn-3Al Titanium Alloy Rod (Wire) for Fasteners".

AMS 4914A-1992 "Solid solution treated 15V-3Al-3Cr-3Sn titanium alloy cold-rolled sheet and strip".

Application area:

TB5 alloy is mainly used to manufacture various sheet metal components and fasteners, which can meet the requirements of high structural efficiency, high production efficiency, and low manufacturing cost. The working temperature in the solution treatment state is below 200 ℃, and the working temperature in the solution aging state can reach 290 ℃. The semi-finished products of this alloy mainly include thin plates, strips, and rods (wires), and can also be used to produce pipes.