Location：
Basic characteristics:
TA13 titanium alloy, a low strength, high plasticity ɑ Type titanium alloy has excellent process plasticity, weldability, and thermal stability. It often exhibits its unique charm in the annealed state, but after appropriate strengthening heat treatment, its potential can be fully tapped, and the long-term working temperature can reach an astonishing 350 degrees Celsius.
For the forming technology of TA13 alloy sheet, whether in annealing or solid solution state, cold forming techniques such as bending, stretching, and hanging pressure can be easily mastered. If heating molding is required, temperatures below 350 degrees Celsius are the most ideal choice, ensuring that the aging of the material is not affected in the subsequent range of 400-475 degrees Celsius.
TA13 (GB/T 3620.1-2016) chemical composition:
Chemical Composition(%) TA13 Fe C Cu N H O Single Total Ti - - 2 - - - - - Remainder 0.2 0.08 3 0.05 0.01 0.2 0.1 0.3 TA13 mechanical performance:
condition Heat treatment
or conditiontensile strength Yield point Elongation or elongation
after fractureσb σs δ Mpa Mpa % Hot rolled and cold-rolled sheet metal;
0.5≤t≤2Annealed state (M) 540~770 460~570 ≥18 Technical standards for TA12 materials:
GB/T 3621-2007、GB/T 3620.1-2016, etc.
Application area：
Seawater desalination plants, firewalls and blast walls on offshore platforms, bridges, structural design components, oil storage tanks, pressure vessels, heat exchangers, water heaters, rotors, impellers and shafts, cutting tools for industries such as petroleum, electronics, chemical, pharmaceutical, textile, food, machinery, construction, nuclear power, aerospace, military, etc.
Product form:
TA12 plate, bar, pipe, steel strip, wire, forging, forged pipe, forged plate, forged bar, round bar, plate, thin plate, seamless pipe, welded pipe, round steel, wire, steel plate, coil, and strip, etc.
